Bridges. Structures. Code.

The engineering behind everyday life.

Pren Moodley is a Pr Eng bridge and structural engineer, and a certified bridge and culvert inspector. Based in South Africa, with projects in Lesotho, Mozambique, the DR Congo, Zambia and India. Vlogs on YouTube, posts on LinkedIn, loves to vibe code.

Pren Moodley, arms folded, smiling, in a white shirt
LeadsA structural engineering divisionAssociate Director, ROMH Consulting
JudgeSAISC Steel Awards 2026Southern African Institute of Steel Construction
FinalistYoung Engineer of the Year 2026CESA and SAICE
PanellistSA Bridge Engineering SymposiumExpert panel, Midas, 2025
~15
Years' experience
2019
Registered Pr Eng
75+
Projects delivered
250+
Structures inspected

Projects In Motion

Each project beside the mechanism that made it work. Move your cursor over a model, or just watch it run.

Cable-stayed
Truck 15.0 mIllustrative
012019 · Limpopo, South Africa

Univen Cable-Stayed Bridge

A cable-stayed entrance bridge on a tight site, resolved against hydraulic, ecological and geotechnical constraints.

30 m
Cable-stayed span
15 m
Central pylon
FEM
Whole structure modelled in SoFiSTiK
The full story

A 30 m cable-stayed entrance bridge on a 15 m central pylon, resolved against hydraulic, ecological and geotechnical constraints on a tight site. Whole structure modelled in SoFiSTiK FEM.

Roof lift
Lift 1 / 4Plant running
022016 · Rosslyn, Pretoria

BMW B50 Roof Lift

Raised the roof of a working assembly plant while production carried on beneath it, using methods borrowed from bridge launching.

Live
Production ran beneath the lift
Rods
Tension-rod suspended floors
Award
SAISC Steel Awards winning team
The full story

An incremental roof launch over a working assembly plant, raising the roof while production carried on beneath it by methods borrowed from bridge launching. Connection design, tension-rod suspended floors and retrofitted supports, supervised through night demolitions. Winning team at the SAISC Steel Awards.

Pump station
Flood 3.0 mIllustrative values
032020 · Lephalale, Limpopo

Mokolo & Crocodile River Water Augmentation

A low-lift pump station held down by rock-anchored stress bars, so a flood cannot float it.

R2 bn
Water pipeline programme
Rock
Anchored against flood buoyancy
Fish
Ladders on the abstraction works
The full story

Multidisciplinary coordination on a R2 billion water pipeline. Designed the low-lift pump station with rock-anchored stress bars to resist flood-induced buoyancy, and led structural design of the abstraction works, including canal walls, filtration structures and ecological fish ladders.

Jacking
1 · Jack upIllustrative
042022 · Knysna, Western Cape

N2 Bridge Jacking

Lifting a live highway deck to replace its bearings. The halving joints made the lift sequence the whole problem.

Deck
Live highway deck lifted
Joints
Halving joints set the sequence
Steel
Tailored jacking system
The full story

Temporary works design to lift a live highway deck and replace its bearings. The halving joints made the lift sequence the whole problem. The answer was a tailored structural steel jacking system worked around them.

Assessment
Assessed 0 / 6Illustrative
052024 · Johannesburg, Gauteng

Expert Witness After a Building Fire

An emergency assessment made inside a fire-damaged building, in hours, so search, medical and forensic teams could enter. Later given as evidence.

Hours
Assessment made in hours, on a changing structure
Enquiry
Commission of enquiry, broadcast live
Court
Palmridge Magistrate’s Court
The full story

Expert witness on the structural condition of a building destroyed by fire in central Johannesburg, before a commission of enquiry that was broadcast live and in the Palmridge Magistrate’s Court. The evidence rested on an emergency assessment made inside the structure so that search, medical and forensic teams could enter and recover the dead, carried out in hours on a building whose condition was unknown and still changing. What it concluded governed where people could go and for how long.

Joint
Joint breathingIllustrative
062023 · India / South Africa

Agrément SA Bridge Joint Certification

Assessing proprietary bridge joints that have no national standard behind them: first principles and the evidence itself.

None
National standard to check against
India
Plant and laboratories audited
Cert.
Agrément certification
The full story

Technical assessment of proprietary bridge joint systems seeking approval for the South African market. Agrément South Africa certifies products that have no national standard behind them, so there is nothing to check against but first principles and the evidence itself: structural analysis and performance validation, the manufacturing plant in India inspected, and the laboratories that produced the test data assessed there too. A finding the specifier then relies on.

More of the work: a selection, not the full record

Bridge design & delivery

  1. 2025

    N2 Higginson Highway Bridges & Culverts

    KwaZulu-Natal

    Inspections, preliminary bridge and culvert design and technical reporting across four new bridges, one rehabilitation and three culverts.

  2. 2024

    R555 Bridge & Culvert Infrastructure

    Mpumalanga

    Preliminary and detailed design for two new bridges, one widening, one rehabilitation and a culvert, with full bridge reports.

  3. 2024

    R579 Corridor Bridges & Culverts

    South Africa

    Inspection and preliminary design of four bridges and eight major culverts, with technical documentation and recommendations.

  4. 2023

    Senqu Bridge Launch Nose

    Lesotho

    Temporary works only: the launch nose used to erect the deck, with its connection detailing and bracing systems, 10 m long by 5.5 m wide by 3.4 m high. The bridge itself was not his design.

  5. 2021

    Holy Cross Bridge

    Eastern Cape

    A 39 m fully integral reinforced concrete bridge with no bearings and no deck joints, the deck and substructure acting as one frame. Involvement ran from concept through to preliminary design.

  6. 2019

    Composite Vehicular Bridges

    Kinshasa, DR Congo

    A series of sixteen 20 m span composite bridges engineered for repeatability: one detailed design built over and over, with quality control and fabrication inspection managed through to client submission.

  7. 2018

    ILM Pipe Bridge

    Durban

    Launch nose design for an incrementally launched pipe bridge, sized to the moment and shear demands set by the lead engineer.

  8. 2015

    Tshwane District Hospital Pedestrian Bridge

    Pretoria, Gauteng

    A 30 m structural steel pedestrian bridge linking the maternity and antenatal wards, designed and supervised through construction, with a 120 ton reservoir support retrofitted into a tight existing footprint on the same project.

Inspection & assessment

  1. 2024

    SANRAL Bridge & Culvert Inspections

    Limpopo

    Inspection of approximately 60 structures; ITIS documentation and sign-off to COTO standards.

  2. 2023

    Munyaka Pedestrian Bridge

    Gauteng

    Condition assessment and modelling of a 110 m suspension bridge, with a recommendation to the client on whether construction should continue.

  3. 2022

    Muanda Bridge Inspection

    Mozambique

    Inspection and structural evaluation for a proposed road bridge, producing as-built records, structural models and client recommendations.

  4. 2022

    R37 Bridge Inspections

    Limpopo

    COTO-compliant inspection of 15 structures with full inventory and condition assessment.

  5. 2021

    Benoni & Vereeniging Region Bridges

    Gauteng

    Inspection and reporting across various bridge and culvert structures; project management and tender evaluation for sub-consultants.

  6. 2021

    R33 Bridge Inspections

    Mpumalanga

    Full inventory and condition ratings on three bridges to COTO and TMH19 methodology.

  7. 2019

    Letseng Diamond Mine Crusher

    Lesotho

    Structural integrity inspection of the crusher structure: safety margin assessment, defect mapping and recommendations on D.E.R. methodology.

  8. 2016

    R35 & N11 Bridge and Culvert Inventory

    Mpumalanga

    Identified and recorded 73 structures, classified to TMH19 and rated to SANRAL D.E.R. standards.

Temporary works & jacking

  1. 2021

    Abbotsford Bridge Jacking

    South Africa

    Temporary works design and structural steel configuration for deck lifting and bearing replacement.

  2. 2020

    Klipspruit Bridge Bearing Replacement

    North West

    Temporary works following an electrical fault; chemically anchored bracket systems developed in Hilti Profis for both railway and road access conditions.

  3. 2019

    Crocodile Bridge Jacking

    Mpumalanga

    Jacking design across a skewed deck geometry, using universal structural steel jacking frames for piers and abutments, with prestressed anchorage and Prokon analysis.

  4. 2018

    Mount Edgecombe Interchange

    Mount Edgecombe, KwaZulu-Natal

    Lateral stability and launch nose design for the incrementally launched decks at the N2 and M41 interchange.

  5. 2017

    Groot Marico Bridge Jacking

    North West

    Deck jacking and bearing replacement using chemically anchored systems.

  6. 2016

    Komatipoort River Bridge Bearing Replacements

    Komatipoort, Mpumalanga

    Deck jacking and bearing replacement on the river crossing at Komatipoort.

Buildings, water & industrial

  1. 2022

    Air Supply Unit Structures

    Rosslyn, Pretoria

    As-built records generated by inspection, then design of a composite oven floor and structural steel frame for air cooling systems.

  2. 2018

    Koeberg Nuclear Power Station Steel Structures

    Western Cape

    Structural steel buildings designed to a crack width limit of 0.1 mm for hazardous containment; Prokon and SoFiSTiK for concrete and steel detailing.

  3. 2018

    Data Centre Roof Structure

    Cape Town

    Structural steel roof design with the emphasis on insulation and thermal loading.

  4. 2018

    Discovery Building Façade

    Sandton

    Aluminium framing system for a new glass façade, fast-tracked with proprietary screw systems and designed for thermal loading.

  5. 2018

    Eden Park & Moffat Substations

    Johannesburg

    Reinforced concrete switchgear buildings, transformer bays and site supervision.

  6. 2017

    KwaNqetho Reservoir

    Durban

    A 6 Mℓ square reservoir and valve chambers on steep terrain, resolved with retaining walls and C3-stabilised fill; FEM and hand-calculation validation.

  7. 2015

    Zuikerbosch 2 Filter Block Roof

    Vereeniging, Gauteng

    Structural steel roof design for the filter block at Rand Water’s Zuikerbosch purification works.

  8. 2014

    Sebenza Substation

    Johannesburg

    A 60 m-long jointless building housing sensitive switchgear: suspended floors, crane beams and blast structures under strict shrinkage criteria.

  9. 2013

    Kusile Power Station Coal Yard

    Bronkhorstspruit

    Site supervision and quality assurance on coal stock yard structures, including RC plinths, slabs and elements for the coal conveyor system.

Built To Explain

Two small tools that show how a thing works, written and built by Pren. Open them and push the controls.

Launch
Segment 1 / 8Casting
ILMIncremental launching method

Launch Your Own Bridge

Set the spans and the curve, then watch the deck cast behind the abutment and pushed out across the valley, one segment a week.

Senqu
Launch nose, Lesotho, 2023
M41
Launch nose, Mount Edgecombe interchange, 2018
Durban
Launch nose, ILM pipe bridge, 2018

Built from Pren's launch-nose design work on three launched structures.

Damper
Sway 0 mmDamper on
TMDTaipei 101

The 660 Tonne Ball Inside Taipei 101

A heavy ball hung near the top, tuned to the tower's own rhythm, swings against it and takes the energy out. Switch it off and watch the same wind push the tower much further.

660 t
Steel ball
Tuned
To the tower's own period
2-mass
Simplified model, running live

Work History

From contractor's site engineer to divisional leader and director. Each colour is one role; select a bar to jump to it.

  1. Aug 2025 to Present

    Associate Director

    Leads the Structural Engineering Division across major public and private infrastructure projects.

    More

    Technical governance, quality management, client relationships and engineering risk management.

  2. Nov 2019 to Present

    Director

    Corporate governance and niche structural engineering through his own consulting practice.

  3. Feb 2014 to Jul 2025

    Associate & Shareholder

    Structural Engineer to Senior to Associate and shareholder. Bridge Design Specialist on SANRAL projects.

    More

    Progressed through the practice while participating in strategic business oversight: bridge engineering, structural engineering, project management and business development.

  4. Jan 2013 to Jan 2014

    Site Engineer

    The contractor's engineer on site: set out the works, supervised subcontractors and ran quality assurance.

    More

    Managed day-to-day construction execution and testing, to ensure construction matched the engineering drawings, specifications and programme.

South Africa, Worldwide

Based in South Africa and open to collaboration anywhere. Projects so far in six countries.

South Africa · home base6 countries

Open To Global Collaboration

Based in South Africa, working across Africa and India, and open to projects and partnerships anywhere in the world.

Bridge designInspectionTemporary worksExpert witness
  • South AfricaHome base. Bridges, structures, inspection and temporary works across the country.
  • LesothoSenqu bridge launch nose. Letseng crusher structure.
  • MozambiqueMuanda bridge inspection.
  • DR CongoSixteen composite bridges, Kinshasa.
  • ZambiaProjects delivered in Zambia.
  • IndiaPlant and laboratory audit for bridge joint certification.

Recognition

Industry awards, judging panels and invited technical contributions.

  1. 2026
    CESAConsulting Engineers South Africa
    Young Engineer of the Year
    Finalist
  2. 2026
    SAICESouth African Institution of Civil Engineering
    Young Engineer of the Year
    Finalist
  3. 2026
    SAISCSouthern African Institute of Steel Construction
    Steel Awards
    Judge
  4. 2025
    MidasBridge engineering software developers
    SA Bridge Engineering Symposium
    Expert Panellist
  5. 2022
    CESAConsulting Engineers South Africa
    Young Engineer of the Year
    Finalist
  6. 2017
    SAISCSouthern African Institute of Steel Construction
    Steel Awards · BMW B50, Rosslyn
    Winning Team
  7. 2010
    WitsUniversity of the Witwatersrand
    Second Year Bridge Building Competition
    Winning Team
  • Registration

    Pr Eng

    Engineering Council of South Africa, 2019

  • Education

    BSc Civil Engineering

    University of the Witwatersrand, 2012

  • Membership

    SAICE Member

    South African Institution of Civil Engineering

  • Certification

    COTO Bridge Inspector

    Committee of Transport Officials, 2019

> collaborate --from "south africa" --to "anywhere"

Let's Talk About Your Structure.

Based in South Africa. Open to collaboration anywhere in the world.

Based in
South Africa
Open to
Global collaboration
LinkedIn
in/pmoodley
YouTube
@revengersHammer